Wall-to-Floor Cable Display Kit - 4m Steel Wire & Fittings Only

With the Wall-to-Floor Cable Display Kit, you can create professional displays for walls & windows to exhibit posters, advertising & signage. These cable systems are installed between the wall and floor, making them ideal for venues with very high ceilings, such as large department stores and warehouse supermarkets. They are also a great option for estate letting agents, travel agencies, restaurants, etc., that (for any reason) are unable to hang cables from the ceiling! These wall-to-floor cable display fittings utilise 1.5mm steel cable. The cable fittings screw directly into the wall & floor with the cable fitted between them. The floor fitting has a spring inside that acts as a wire tensioner, keeping the cable taut over time while adapting to temperature changes and heavy usage. Once installed, the vertically suspended steel wires support high-quality acrylic poster pockets (sold separately) to present advertising, prices, and signage. They are dual-sided, allowing for posters on both sides - ideal for simultaneous inward/outward-facing window advertising!

Wall-to-Floor Cable Display Kit contains a single cable drop featuring (1) wall fitting, (1) ceiling fitting, and (1) 4m long, 1.5mm steel cable. Creating a complete cable display system will require at least 2 suspended cables to mount the poster panels correctly!

Wall-to-floor cable display system - installation:

1. Separate the wall fitting into two pieces - a long nose & a wide base.
2. Screw the wide base into the wall for the top of the display, and reattach the long nose.
3. Thread the cable through the hole on the end of the long nose.
4. With the cable now suspended, align the position for the floor fitting.
5. Separate the floor fitting into 2 pieces (the long nose with spring inside, and the base).
6. Screw the base part into the floor (using the suspended cable as a guide)
7. Thread the cable into the floor fittings nose & tension spring, in that order.
8. Secure the cable stopper and remove any extra cable with cutters.
9. Reattach the floor fitting nose & base together (The spring inside will maintain cable tension)
10. Repeat the above steps for the next wall-to-floor cable fittings - always keep in mind the width of the posters or signage you will be displaying!