Wall-to-Wall Cable & Tensioner Display Kit - 3m Steel Wire & Fittings Only

With the Wall-to-Wall Cable & Tensioner Display Kit, you can create professional displays on walls & windows for posters, advertising & signage. A wall-mounted cable system ideal for various businesses such as small retail shops & large department stores, supermarkets, estate letting agents, travel agencies, restaurants, hair and beauty salons. These wall-to-wall cable display fittings utilise 1.5mm steel cable braced using a wire tensioner. The cable fittings screw directly into the wall with the cable fitted between them. The wire tensioner keeps the cable taut over time, adapting to temperature changes and heavy usage. Once installed, multiple vertically suspended steel wires support high-quality acrylic poster pockets (sold separately) to present advertising, prices, and signage. They are dual-sided, allowing for posters on both sides - ideal for simultaneous inward/outward-facing window advertising!

Wall-to-Wall Cable & Tensioner Display Kit contains a single cable drop featuring (2) wall fittings, (1) wire tensioner, and (1) 3m long, 1.5mm steel cable. Creating a complete cable display system will require at least 2 suspended cables to mount the poster panels correctly!

Wall-to-wall cable & tensioner display system - installation:

1. Separate the fitting (with cable) into two pieces - a long nose & a wide base.
2. Screw the wide base into the wall for the top of the display, and reattach the long nose.
3. Separate the next fitting into two pieces - this will be the bottom of the display.
4. With the cable suspended from the top fitting as a guide, screw the next wide base into the wall.
5. Thread the cable into the long nose of the bottom fitting.
6. Secure the cable by tightening the grub screw on the side.
7. With the cable secured, adjust the tensioner (by twisting the 2 ends) until the cable is taut.
8. Once the cable is in the correct state, remove any extra cable dangling from the bottom with cutters.
9. Repeat the above steps for the next wall-to-wall cable fittings - always keep in mind the width of the posters or signage you will be displaying!
10. If the cables begin to waver and sag over time, tighten the wire tensioner.