A2 LED Display Pocket & Wall to Wall Kit (Ready to Use / Complete System)

New product

'Ready to Use' A2 LED Display Pocket & Complete Wall to Wall Cable System Kits. Wall Mounted Cables & Poster Holders with Integrated LED Lighting System. Illuminate Posters & Adverts in Window Display & Advertising Spaces for your Estate Agency, Travel Agent, Office, Cafe, or Retail Store. Easy to Install fittings. Add posters quickly & by hand (no tools required!). High Quality, UK made products

More details

£ 263.99

More info

Ready to use LED Display Pockets are available in Portrait & Landscape orientation; A2 standard size. Dual-sided acrylic holders allow 2 Posters to be inserted into a single pocket, enabling adverts to be displayed inward & outward facing in your window display! Pocket insert size: 594mm x 420mm. Wall to Wall Cable Display System has all chrome fittings, and 3m long 1.5mm Steel Cables.

Complete A2 Display LED Pocket Kits include:

  • LED A2 Pockets, Portrait or Landscape (up to 3 Holders per kit)
  • LED Driver / Transformer & 5m electrical wiring with 3 pin plug (UK)
  • 2x Power Connectors
  • 2x Wall to Wall Cable Display System Sets, with 3m Steel Cable
  • Display Pocket Supports, 4 per Panel (Attach Pockets to Suspended Cables)

Installing the Cable Display System:

  1. Seperate the wall fittings, by unscrewing their stem from their screw mount
  2. Install the screw mounts onto the wall, the top & botom most position of your display space
  3. Re-attach the stems to the screw mounts, and rotate them so the cable holes on their tips are aligned
  4. From the top fitting, thread a cable downward through the stem's hole
  5. Add 1 Power Connector onto the cable
  6. Thread the cable downward through the bottom stem hole
  7. Place a cable-stopper onto the end of the cable, moving it right up to the stem
  8. Tighten the cable-stoppers grub-screw to secure it into place
  9. Cut away any access cable length
  10. Repeat above steps for the second Wall to Wall cable (Use an LED pocket's width as a guide!)
  11. Attach your LED Display Pockets to the suspended cables, using the Supports provided (Allen / Hex Key Supplied)

Although this is a safe low-voltage product, please remember to UNPLUG & SWITCH OFF any power while installing!

Installing LED Driver / Transformer:

  1. Attach a naked-end wire to one of the Power Connector on a suspended cable
  2. Secure the Power Connector by tightening the small grub-screw on the relevant side
  3. Attach the other wire to the Power Connector of the opposite cable
  4. Secure the Power Connector to the wire
  5. Finally plug the transformer into the power socket

Reviews

Write a review

A2 LED Display Pocket & Wall to Wall Kit (Ready to Use / Complete System)

A2 LED Display Pocket & Wall to Wall Kit (Ready to Use / Complete System)

'Ready to Use' A2 LED Display Pocket & Complete Wall to Wall Cable System Kits. Wall Mounted Cables & Poster Holders with Integrated LED Lighting System. Illuminate Posters & Adverts in Window Display & Advertising Spaces for your Estate Agency, Travel Agent, Office, Cafe, or Retail Store. Easy to Install fittings. Add posters quickly & by hand (no tools required!). High Quality, UK made products

14 other products in the same category: