A0 LED Display Pocket & Ceiling Hanging Kit (Rod system / Ready to Use)

Ready to use LED Display Pockets are available in Portrait & Landscape orientation; A0 standard size. Dual-sided acrylic holders allow 2 Posters to be inserted into a single pocket, enabling adverts to be displayed inward & outward facing on your display! Pocket insert size: 841mm x 1189mm. Rod Display System with all chrome fittings, and 1.5m long 6mm Steel Rods. Rods have threaded ends, enabling multiple rods to be screwed together to create longer lengths!

Complete A0 Display LED Pocket Kits include:

• 1x LED A0 Pockets, Portrait or Landscape
• LED Driver / Transformer & 5m electrical wiring with 3 pin plug (UK)
• 2x Power Connectors
• 2x Ceiling Mounted Rod System Sets, including 4x 1.5m Rods
• Display Pocket Supports, 4 per Panel (Attach Pockets to Suspended Rods)

Installing the Ceiling Mounted Rods:

1. Seperate a ceiling fitting, by unscrewing the brass screw mounts concealed inside
2. Screw the brass mount into the ceiling, and reattach the ceiling fittings shell & rod
3. Thread 1 Power Connector onto the rod, move it to the top & tighten it's grub-screw
4. Repeat above steps for the second rod (Use an LED pocket's width as a guide!)
5. Attach your LED Display Pockets to the suspended rods, using the Supports provided (Allen / Hex Key Supplied)
6. Cut off any access rodding length if necessary

Although this is a safe low-voltage product, please remember to UNPLUG & SWITCH OFF any power while installing!

Installing LED Driver / Transformer:

1. Attach a naked-end wire to one of the Power Connector on a suspended rod
2. Secure the Power Connector by tightening the small grub-screw on the relevant side
3. Attach the other wire to the Power Connector of the opposite rod
4. Secure the Power Connector to the wire
5. Finally plug the transformer into the power socket