Suspended Wooden Shelves Cable Kit, Ceiling-to-Floor (Fittings Only)

Suspended Wooden Shelves Cable Kit:

(x4) Ceiling-to-Floor fixings
(x4) 4m long steel cables. (cut cable to exact length during installation!)
(x4) Shelf Supports / Side Supports (4 per shelf).
(All) Allen Keys, screws and wall plugs are included (Complete installation).

Note: Shelf Supports enable a single shelf board to carry up to 20kg.

Ceiling-to-floor cable installation:

1. Separate the ceiling & floor fittings from the brass screw mounts concealed inside their chrome caps.
2. Screw the first brass mount into the top/ceiling, and reattach the ceiling-fitting cap with cable.
3. With the wire now suspended, align the position for the floor fitting and screw in the floor mount.
4. Thread the cable into the floor-fitting cap & tension spring (in that order!)
5. Secure the cable stopper and cut off any access cable.
6. Reattach the floor cap into the floor mount - The spring inside will maintain cable tension.
7. Do the above steps for the second ceiling-to-floor cable - keeping in mind the width of the supports & wooden shelf boards.