Ceiling-to-Floor Cable Display Kit - 4m Steel Wire & Fittings Only

With the Ceiling-to-Floor Cable Display Kit, you can create professional displays for windows or reception areas, making them ideal for various businesses such as estate letting agents, travel agencies, restaurants, hair and beauty salons, small retail shops, and large department stores. These ceiling-to-floor mounted cable display systems utilise 1.5mm steel cable and can be easily installed in any location, not just windows! The cable fittings screw directly into the ceiling, floor, or window sill. The floor fitting has an additional spring mounted inside to create tension on the cable attached between the ceiling & floor. Once installed, the vertically suspended steel wires support high-quality acrylic poster pockets (sold separately) to present advertising, prices, and signage. They are dual-sided, allowing for posters on both sides - ideal for simultaneous window and office advertising!

Ceiling-to-Floor Cable Display Kit contains a single cable drop featuring (1) ceiling fitting, (1) floor fitting, and (1) 4m long, 1.5mm steel cable. Creating a complete cable display system will require at least 2 suspended cables to mount the poster panels correctly!

Ceiling-to-floor cable display system - installation:

1. Separate the ceiling & floor fittings from the brass screw mounts concealed inside their chrome shell.
2. Screw the first brass mount into the top/ceiling, and reattach the ceiling shell with cable.
3. With the cable now suspended, align the position for the floor fitting and screw in the second brass mount.
4. Thread the cable into the floor fitting shell & tension spring, in that order.
5. Secure the cable stopper and remove any extra cable with cutters.
6. Reattach the floor fitting shell over the brass mount (The spring inside will maintain cable tension)
7. Repeat the above steps for the second ceiling-to-floor cable fittings, based on the width of your acrylic pockets.