Wall to Wall Pink Cable Fitting

Wall to Wall Pink Cable Fitting is straightforward to install, with direct screw fixing to brick & plasterboard walls, and the ideal cable display system if you can not screw fixtures to the ceiling or floor. This wall-mounted pink cable system makes an incredibly modern & stylish display space that can hang Acrylic Panels, Posters, Frames, Photos, and more!

Wall to Wall Pink Cable Fitting - Installation

1. Unscrew a wall fitting into (2) pieces (1 'Wall Mount' and 1 'Pink Cover')
2. Screw the brass 'Wall Mount' to the wall that dictates the top of your display and screw the 'Pink Cover' back onto it (so the 'cable hole' on the end faces downwards, with the 'Grub Screw' located on the side!)
3. Do the same with the other wall fitting, but this time measure, align and install the 'Wall Mount' at what will be the bottom of your display.
4. Once screwed to the wall, add the 'Pink Cover' and make sure this 'cable hole' is facing upwards with the 'Grub Screw' located on the side!
5. Take your cable, thread it through the 'cable hole' of the top wall fitting, and tighten the 'Grub Screw' on the side of the 'Pink Cover'.
6. Now thread the cable's other end through the bottom Fitting, and tighten the 'Grub Screw'.
7. Any access cable that protrudes from the bottom - cut to make a neat finish!

Note: Fittings can also be supplied with "Transparent" Perlon Cord! (On request)