Metal Print / Steel Plate Art Hanging 'Wall-to-Floor' Kit

Wall-to-floor metal print/steel plate art hanging consists of solid brass fittings in a ready-made cable kit that screws directly into concrete or wood walls & floors. A cable display system that suspends a 4m steel cable with panel supports to hang the metal poster art, panel or screen. These wall-to-floor cable kits are easy to install! Different cable kits for displaying a single steel plate to multiple plates in a column, one above another. Note: Add additional panel supports to your cables at any time!

Installation:

Separate the wall fitting into two pieces (stem & base.)

Screw the base piece into the wall - this will be the top of your display.

Reattach the chrome stem into the installed base mount.

Separate the floor fitting into three pieces (stem, floor mount, tension spring.)

With the wire now suspended, align the position for the floor fitting and screw in the floor mount.

Thread the cable into the floor fittings stem & tension spring (if done correctly, the spring should sit inside the stem!)

Secure the cable stopper and cut off any access cable.

Reattach the floor stem into the floor mount - The spring inside will maintain cable tension.

Do the above steps for the second wall-to-floor cable - keeping in mind the width of your steel plate art.