3A4 Poster Panel & Ready-Made Cable Kit (Ceiling-to-Floor)

The 3A4 Poster Panel & Ready-Made Cable Kit create professional window displays that are ideal for estate agents, travel agencies, restaurants, hair and beauty salons, small retail shops, and large department stores. These ceiling-to-floor suspended cables are easy to install and an effective display tool for more than just window displays!

The professional 3-in-1 acrylic panel features three A4 portrait pockets for displaying separate posters, and it requires no tools to insert or remove the posters. Each panel is double-sided, allowing each triple A4 pocket to showcase posters on both sides, which is perfect for window displays. Additionally, cable fittings are available in a satin chrome finish to suit any professional establishment.

All cable kits include:

• 2x ceiling fittings
• 2x floor fittings
• 2x 4m steel 1.5mm cables
• 4x Panel supports (per panel)
• Triple A4 pocket / 3A4 poster panel (up to 3 panels)

Ceiling-to-floor ready-made cable kit installation:

1. Unscrew the ceiling-fitting into two pieces (1 'Brass Mount' and 1 'Chrome Cap with Cable'). Install the 'Brass Mount' to the ceiling. Now screw the polished 'Chrome Cap with Cable' back onto the Brass Mount.
2. Unscrew the floor-fitting into two pieces (1 'Floor Mount' and 1 'Chrome Floor Cap' with Spring and Cable).
3. With the cable suspended from the ceiling, you can now cut its length (to an approx. length).
4. Now thread the cable back through the tension 'Spring', and reattach the brass stopper to the cable's end - to prevent the cable from pulling out of the 'Spring' and 'Chrome Floor Cap'.
5. With the cable hanging straight, you can mark and install the 'Floor Mount' in the correct position.
6. Screw the 'Chrome Floor Cap' (with the cable attached) back onto the 'Floor Mount'.

Note: The cable MUST be taut before the 'Chrome Floor Cap' has been fully screwed down into the 'Floor Mount' - the 'Spring' will maintain cable tension for you!