2A4 Pocket Wall Rod Display Set (Ready-made)

New product

2A4 Pocket Wall Rod Display Set including an Acrylic Panel with 2x A4 inserts and wall-to-wall Rod Display System - Complete ready-made kits for creating window displays & POC retail tools in estate agents, retail, office and education sectors. The Acrylic Panel has 2x A4 portrait pockets/inserts and can display up to 4 posters! Rod fittings in satin chrome finish.

More details

£ 69.99 tax excl.

More info

The 2A4 Pocket Wall Rod Display Set creates professional displays that are quick & easy to use - a complete kit including a wall-mounted rod display system and acrylic panel with double pockets for multiple posters. Each A4 pocket/insert has an open top, with two per acrylic panel. Adverts & notices can be inserted & removed from these pockets without any tools. And when used in a window display, posters can be displayed back-to-back (inward & outward facing). So you can display up to 4 posters in a single acrylic panel!

Our rod display fittings are made from high-quality solid brass material and have a premium polished chrome finish. The 6mm display rods are 1.5m in length, but each rod has a 'male & female' screw thread; this enables you to create a longer 3m length by screwing 2 rods together! All these fixtures combined create professional-level displays, most commonly seen in estate agent & retail supermarket windows. Create signage & information spaces for offices & the education sector. Each 2A4 Pocket Wall Rod Display Set consists of:

  • 4x 6mm Display Rods 1.5m (Screw together for longer lengths)
  • 4x Wall Mount fixture
  • 'Selected' quantity of panels
  • 4x Panel support (per panel)

Wall-to-wall rod fixtures are easy to install:

  1. Mark the position for the first top wall-mount fixing.
  2. Using a level tool & panel width as a guide, measure the distance to the opposite side and place a mark for the position of the adjacent wall-mount fixing.
  3. Drill holes in said marks, and place a wallplug inside each (make sure each plug is completely submerged & flush to the wall's surface).
  4. Separate each fixing into two parts (a chrome cap & screw mount) - by unscrewing the small hex Allen bolt of each.
  5. Screw the 'screw mount' into each hole.
  6. Reattach the chrome caps and partially re-tighten the hex Allen bolt.
  7. Using the installed top wall-mount fixings as a guide, repeat the above steps for the bottom fixings.
  8. With all wall-mount fixings installed (top & bottom), rotate each so the slots are aligned and completely tighten the small hex Allen bolts.
  9. Now cut your 6mm rod to length if needed, or attach 2 rods for a longer length.
  10. Unscrew the chrome-caps larger hex Allen bolts, and place a 6mm rod between each pair (top & bottom).
  11. Tighten the hex Allen bolts to secure the rod in place.
  12. Lastly, secure four Panel Supports to each acrylic panel and attach them between the two vertically mounted rods.

Reviews

Write a review

2A4 Pocket Wall Rod Display Set (Ready-made)

2A4 Pocket Wall Rod Display Set (Ready-made)

2A4 Pocket Wall Rod Display Set including an Acrylic Panel with 2x A4 inserts and wall-to-wall Rod Display System - Complete ready-made kits for creating window displays & POC retail tools in estate agents, retail, office and education sectors. The Acrylic Panel has 2x A4 portrait pockets/inserts and can display up to 4 posters! Rod fittings in satin chrome finish.

6 other products in the same category: