A3 'Hook On' Acrylic Pocket Wall Display Kit

A wall to wall acrylic panel 'hook-on' / over rod display system, which enables you to freely add or remove multiple display panels from a wall mounted horizontal display rod system. An incredibly simple yet effective concept used by professionals worldwide, these complete ready-made sets come into their own when used in window displays, retail shops, reception areas & waiting rooms, and offices. All rod display fittings are made from high quality solid brass, and have a premium polished chrome finish. 6mm thick display rods are 1.5m in length, but can easily be cut shorter &/or custom lengths are available on request! All these fixtures combined enable you to create professional level display!

Each ready-made panel display set consists of:

• 2x 6mm Display Rod 1.5m
• 2x Wall Mount fixture
• A3 Hook-on Panels, Portrait or Landscape
• All Screws & Hex/Allen Key included

Wall to Wall rod fixtures are easy to install:

1. Mark on your wall, where the first wall-mount fixing will be.
2. Using a level tool, measure the distance required to the opposite side, and place a mark for the next fixing.
3. Drill holes in your marks, and place a wallplug inside each (make sure the plugs are completely fluch with the wall!)
4. Seperate each fixings 'chrome cap' from it's brass 'screw-mount' by unscrewing the small hex/allen bolt on each.
5. Screw the brass screw-mount into each hole; replace the chrome caps back on, and slightly re-tighten the hex/allen bolt.
6. With the wall fixings now installed, rotate each so the slots are aligned; and completely tighten the small hex/allen bolts.
7. Now cut your 6mm rod to length if needed
8. Unscrew the chrome-caps larger allen bolts, and slot the 6mm rods into them.
9. Tighten the allen bolts to secure the rod in place.
10. Lastly, hook your panels onto this now complete display system.