Ceiling & Wall Mounting Blocks for Curtain Rail Aluminum tracking.
Profile (mm): 35 x 18 x 13 (depth)
Warning: Last items in stock!
Mounting Blocks are made from solid Brass. Use the same Block for a Wall or Ceiling Installation! Mounting Blocks can be installed on most surfaces from Solid Walls to wooden beams! A 'slot' on the face of the Mounting Block is for attaching rail when wall mounting. The slot on the Blocks underside is for Ceiling Mounted tracking! You will use the same Curtain Rail & Fittings for both Ceiling & Wall mounted installations!
Mark points every 30 cm along the wall or ceiling you would like your curtains to hang. These will be used to position the Brass Mounting Blocks! Make holes at these points with your drill, and place the wall plugs inside them. Next place a screw inside a Mounting Block and screw it into place. Do this for each hole made. Now take a piece of tracking, place the top-edge of the rear slot over the Mounting Block, and push downwards. The rail will now "click" into place!