Clip Rail Monitor Hanging Kit (LED TV Wall Mount With Picture Rail)

The Clip Rail Monitor Hanging Kit uses suspended cables attached to heavy-duty strap hangers / d-rings to hang your television screen or monitor like a picture. The hangers screw into the VESA holes located on the back of any modern LCD / LED TV screen or computer monitor unit. Adjustable cable hooks on the suspended cables support the strap hangers to hang your television or monitor against the wall. These cable hooks also enable you to adjust the height of your screen, up or down the cables, at any time! The Cliprail picture rail is 2mm aluminium coated in a premium white, silver, or black finish. These TV wall mount fixtures & fittings combined have a weight capacity of 25kg.

Clip Rail Monitor Hanging Kit includes:

(1) 2m picture rail + installation fittings (wall screws, plugs, etc.)
(2) 1.5m steel cable wire with Cobra anchor (clip rail standard fitting)
(2) Adjustable Captain Hook 30kg
(2) Heavy-duty strap-hanger d-rings + screws (you may already have VESA bolts with the television)

Note. For custom-colours & cable lengths - contact us.

Monitor Wall Mount installation:

1. Install the picture rail at the top of the wall (See video)
2. Suspend the cables by inserting their "Cobra anchor" into the picture rail (Insert the anchors at any point along the track - no need to thread from the side)
3. Pinch & slide the cable hooks onto the suspended wires - their spring-locking mechanism will secure their position when released!
4. Screw the strap hangers into the back of the monitor - use the outer-most holes, one left & one right.
5. Hang the monitor on the suspended cable hooks.
6. If necessary, cut the cable to the adequate length - but only after hanging the monitor!