'Ceiling to Wall' Fixed Cable + Tensioner, 4m Length

Fittings screw directly into the ceiling & wall, for an easy installation; this option is a great alternative to the 'Ceiling to Floor' system, if you are unable to screw fittings into the floor! A modern, fully adjustable display system for Acrylic Panels, Posters, Unframed pictures, Photographs, and more! This system comes with an external 'Cable Tensioner' for extra cable longevity!

Installation

Firstly unscrew the 'Cable Tensioner' into 2 pieces. Each piece should have it's own length of cable already attached!

Unscrew the Ceiling Fitting into 2 pieces (1 'Brass Mount', and 1 'Chrome Cap' with cable attached). Install the 'Brass Mount' onto the ceiling, and reattach the 'Chrome Cap' with cable length.

Now unscrew the Wall Fitting into 2 pieces (1 'Wall Mount', and 1 'Chrome Cover' with cable attached). Measure, align, and install the 'Wall Mount' at what will be the bottom of your display. Once screwed to the wall, add the 'Chrome Cover'.

At this point you will know the length of cable your display will need! Take the 2 pieces of the 'Cable Tensioner' and partially screw it back together.

If the cable is still loose when the tensioner is partially attached, loosen the 'Grub Screw' on the side of the Wall Fittings 'Chrome Cover', and pull more cable through it. When the cable has no slack, tighten 'Grub Screw' and tighten the 'Cable Tensioner' until the cable goes taut!

Any access cable can simply be cut, to make a neat finish. DO NOT cut any cable, until you are perfectly sure the system has been install correctly!